POWER WINDOW REGULATOR MOTOR(for Rear Door) INSPECTION

PROCEDURE

1. Click here

   INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

   
   
   1. 

      Apply battery voltage to the regulator motor and check the operation of the regulator motor.

      Table 1. Text in Illustration

      *1	Motor Gear
      *a	Component without harness connected (Power Window Regulator Motor Assembly RH)
      *b	Counterclockwise
      *c	Clockwise

      OK
      Measurement Condition Specified Condition Battery positive (+) → 1 Battery negative (-) → 2 Motor gear rotates clockwise Battery positive (+) → 2 Battery negative (-) → 1 Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor assembly.

2. Click here

   INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

   
   
   1. 

      Apply battery voltage to the regulator motor and check the operation of the regulator motor.

      Table 2. Text in Illustration

      *1	Motor Gear
      *a	Component without harness connected (Power Window Regulator Motor Assembly LH)
      *b	Clockwise
      *c	Counterclockwise

      OK
      Measurement Condition Specified Condition Battery positive (+) → 1 Battery negative (-) → 2 Motor gear rotates clockwise Battery positive (+) → 2 Battery negative (-) → 1 Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor assembly.