ROOF HEADLINING(for TMMF Made 3 Door) INSTALLATION

PROCEDURE

1. Click here

   INSTALL ROOF HEADLINING ASSEMBLY (for Glass Roof)

   
   
   1. 

      Pull the roof headlining back into the vehicle through the back door.

      Note:

      Do not damage the roof headlining assembly or body interior.

   2. Engage the 12 hook-and loop fasteners and install the roof headlining.

   3. Install the clip.

   4. Engage the 2 claws.

   5. for front pillar RH side:

      
      

      1. Engage the 4 clamps.

      2. Connect the connector.

   6. for front pillar LH side:

      
      

      1. Engage the 4 clamps.

      2. Connect the connector.

   7. for rear pillar RH side:

      
      

      1. Engage the clamp.

      2. Connect the connector.

   8. Connect the connectors.

2. Click here

   INSTALL ROOF HEADLINING ASSEMBLY (except Glass Roof)

   
   
   1. 

      Pull the roof headlining back into the vehicle through the back door.

      Note:

      Do not damage the roof headlining assembly or body interior.

   2. Engage the 2 hooks and install the roof headlining.

   3. Install the 3 clips.

   4. Engage the 2 claws.

   5. for front pillar RH side:

      
      

      1. Engage the 4 clamps.

      2. Connect the connector.

   6. for front pillar LH side:

      
      

      1. Engage the 4 clamps.

      2. Connect the connector.

   7. for rear pillar RH side:

      
      

      1. Engage the 3 clamps.

      2. Connect the connector.

   8. Connect the connectors.

3. Click here

   INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY

   Click here

4. Click here

   INSTALL RAIN SENSOR COVER (w/ Rain Sensor)

   Click here

5. Click here

   INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

   Click here

6. Click here

   INSTALL PRE-CRASH SAFETY CITY COVER (w/ Toyota Safety Sense)

   Click here

7. Click here

   INSTALL PRE-CRASH SAFETY 2ND CITY COVER (w/ Toyota Safety Sense)

   Click here

8. Click here

   INSTALL VANITY LIGHT ASSEMBLY (w/ Vanity Light)

   Click here

9. Click here

   INSTALL MAP LIGHT ASSEMBLY

   Click here

10. Click here

    INSTALL ASSIST GRIP ASSEMBLY

    Click here

11. Click here

    INSTALL VISOR HOLDER

    Click here

12. Click here

    INSTALL VISOR ASSEMBLY RH

    
    

    1. Install the visor with the 2 screws.

    2. Install the visor shaft into the visor holder.

13. Click here

    INSTALL VISOR ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

14. Click here

    INSTALL REAR ROOF SIDE RAIL GARNISH RH

    
    

    1. Engage the 4 clips and install the roof side rail garnish.

15. Click here

    INSTALL REAR ROOF SIDE RAIL GARNISH LH

    Tip:

    Use the same procedure as for the RH side.

16. Click here

    INSTALL ROOF SIDE INNER GARNISH RH

    
    

    1. Pass the rear seat 3 point type outer belt through the slit in the roof side inner garnish.

    2. Engage the 5 clips and install the roof side inner garnish.

17. Click here

    INSTALL ROOF SIDE INNER GARNISH LH

    Tip:

    Use the same procedure as for the RH side.

18. Click here

    INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

    
    

    1. Engage the 3 clips and the 3 claws and install the deck trim side panel.

    2. Install the 3 screws.

19. Click here

    INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

20. Click here

    INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    
    

    1. Engage the 2 claws and install the rear seat 3 point type outer belt.

    2. Tighten the bolt.

       41 N*m

       420 kgf*cm

       30 ft.*lbf

21. Click here

    INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

22. Click here

    INSTALL REAR FLOOR FINISH PLATE

    Click here

23. Click here

    INSTALL JACK HANDLE

24. Click here

    INSTALL NO. 2 ROOM LIGHT ASSEMBLY

    Click here

25. Click here

    INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

    Click here

26. Click here

    INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

    Tip:

    Use the same procedure as for the RH side.

27. Click here

    INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

    
    

    1. for 6 speakers:

       
       

       1. Disconnect the connector.

    2. Engage the 2 guides and the 2 clips and install the front pillar garnish.

28. Click here

    INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)

    Tip:

    Use the same procedure as for the RH side.

29. Click here

    INSTALL CENTER PILLAR UPPER GARNISH RH

    
    

    1. Pass the front seat outer belt through the slit in the center pillar upper garnish.

    2. Engage the clip and install the center pillar upper garnish with 2 screws.

30. Click here

    INSTALL CENTER PILLAR UPPER GARNISH LH

    Tip:

    Use the same procedure as for the RH side.

31. Click here

    INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    
    

    1. Engage the 8 clips and the 10 claws.

    2. Engage the 3 guides and install the quarter trim panel.

32. Click here

    INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

33. Click here

    INSTALL FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY RH

    Click here

34. Click here

    INSTALL FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

35. Click here

    INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    
    
    1. 

       Align the paint mark on the front door opening trim weatherstrip with the flange position on the vehicle body and install the weatherstrip.

       Table 1. Text in Illustration

       *a	Paint Mark
       *b	Flange Position

       Paint Mark
       Area Color RH Side Blue LH Side Pink

       Note:

       After installation, check that the corners fit correctly.

36. Click here

    INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Tip:

    Use the same procedure as for the RH side.

37. Click here

    INSTALL COWL SIDE TRIM BOARD RH

    Click here

38. Click here

    INSTALL COWL SIDE TRIM BOARD LH

    Tip:

    Use the same procedure as for the RH side.

39. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

    
    

    1. Engage the 8 claws and install the front door scuff plate.

40. Click here

    INSTALL FRONT DOOR SCUFF PLATE LH

    Tip:

    Use the same procedure as for the RH side.

41. Click here

    INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

    (Click here)

42. Click here

    INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

    (Click here)

43. Click here

    INSTALL SPARE WHEEL COVER

    
    

    1. Install the spare wheel cover.

44. Click here

    INSTALL DECK BOARD ASSEMBLY

    Click here