ROOF HEADLINING(for TMMF Made 3 Door) REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 ROOF WIRE (for Glass Roof)


    1. for Standard:


      1. Align the No. 1 roof wire positioning tape with the markings of the roof headlining.

        A01VIKTE01
        Text in Illustration
        *1 Tape *2 Positioning Tape
        *3 Marking - -

      2. Install the No. 1 roof wire onto the roof headlining with 6 new pieces of tape.

        Note


        • Apply the tape securely in place.

        • Do not touch the adhesive surface when applying the tape to prevent adhesion failure.

    2. w/ Rain Sensor:


      1. Align the No. 1 roof wire positioning tape with the markings of the roof headlining.

        A01VGL1E01
        Text in Illustration
        *1 Tape *2 Positioning Tape
        *3 Marking - -

      2. Install the No. 1 roof wire onto the roof headlining with 7 new pieces of tape.

        Note


        • Apply the tape securely in place.

        • Do not touch the adhesive surface when applying the tape to prevent adhesion failure.

  2. INSTALL NO. 1 ROOF WIRE (except Glass Roof)


    1. for Standard:


      1. Align the No. 1 roof wire positioning tape with the markings of the roof headlining.

        A01VJJBE01
        Text in Illustration
        *1 Tape *2 Positioning Tape
        *3 Marking - -

      2. Install the No. 1 roof wire onto the roof headlining with 7 new pieces of tape.

        Note


        • Apply the tape securely in place.

        • Do not touch the adhesive surface when applying the tape to prevent adhesion failure.

    2. w/ Vanity Light:


      1. Align the No. 1 roof wire positioning tape with the markings of the roof headlining.

        A01VH12E01
        Text in Illustration
        *1 Tape *2 Positioning Tape
        *3 Marking - -

      2. Install the No. 1 roof wire onto the roof headlining with 10 new pieces of tape.

        Note


        • Apply the tape securely in place.

        • Do not touch the adhesive surface when applying the tape to prevent adhesion failure.

    3. w/ Rain Sensor:


      1. Align the No. 1 roof wire positioning tape with the markings of the roof headlining.

        A01VFJVE01
        Text in Illustration
        *1 Tape *2 Positioning Tape
        *3 Marking - -

      2. Install the No. 1 roof wire onto the roof headlining with 8 new pieces of tape.

        Note


        • Apply the tape securely in place.

        • Do not touch the adhesive surface when applying the tape to prevent adhesion failure.

    4. w/ Rain Sensor and Vanity Light:


      1. Align the No. 1 roof wire positioning tape with the markings of the roof headlining.

        A01VDKUE01
        Text in Illustration
        *1 Tape *2 Positioning Tape
        *3 Marking - -

      2. Install the No. 1 roof wire onto the roof headlining with 11 new pieces of tape.

        Note


        • Apply the tape securely in place.

        • Do not touch the adhesive surface when applying the tape to prevent adhesion failure.

  3. INSTALL REAR SIDE RAIL SPACER RH (except Glass Roof)


    1. w/ Curtain Shield Airbag:


      1. A01VK71

        Align the markings on the roof headlining assembly with the rear side rail spacer and install the rail spacer using hot melt glue.

        Text in Illustration
        A01VE0P Adhesive Portion

    2. w/o Curtain Shield Airbag:


      1. A01VHR8

        Align the markings on the roof headlining assembly with the rear side rail spacer and install the rail spacer using hot melt glue.

        Text in Illustration
        A01VE0P Adhesive Portion

  4. INSTALL REAR SIDE RAIL SPACER LH (except Glass Roof)

    Tech Tips

    Use the same procedure as for the RH side.

  5. INSTALL REAR ROOF SILENCER PAD


    1. A01VLD9

      Align the markings on the roof headlining assembly with the 4 rear roof silencer pads and install the silencer pads using hot melt glue.

  6. INSTALL NO. 5 ROOF SILENCER PAD (except Glass Roof)


    1. A01VJN2

      Align the markings on the roof headlining assembly with the 2 No. 5 roof silencer pads and install the silencer pads using hot melt glue.

  7. INSTALL ROOF SILENCER PAD (except Glass Roof)


    1. Align the markings on the roof headlining assembly with the 4 roof silencer pads and install the silencer pads using hot melt glue.

      A01VLSWE01
      Text in Illustration
      *1 Roof Silencer Pad *2 Marking
      *a 25.0 mm (0.984 in.) - -

  8. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Glass Roof)

    Click here

  9. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (except Glass Roof)

    Click here

  10. INSTALL REAR SEAT SHOULDER BELT COVER

    Click here