Click here

ROOF HEADLINING(for TMMF Made 3 Door) REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE DECK BOARD ASSEMBLY

    Click here

  2. Click here

    REMOVE SPARE WHEEL COVER


    1. A004BJ4

      Remove the spare wheel cover.

  3. Click here

    REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

    (Click here)

  4. Click here

    REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

    (Click here)

  5. Click here

    REMOVE FRONT DOOR SCUFF PLATE RH


    1. A0047GL

      Disengage the 8 claws and remove the front door scuff plate.

  6. Click here

    REMOVE FRONT DOOR SCUFF PLATE LH

    Tip:

    Use the same procedure as for the RH side.

  7. Click here

    REMOVE COWL SIDE TRIM BOARD RH

    Click here

  8. Click here

    REMOVE COWL SIDE TRIM BOARD LH

    Tip:

    Use the same procedure as for the RH side.

  9. Click here

    REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    1. A0049CK

      Remove the front door opening trim weatherstrip.

  10. Click here

    REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Tip:

    Use the same procedure as for the RH side.

  11. Click here

    REMOVE FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY RH

    Click here

  12. Click here

    REMOVE FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

  13. Click here

    REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH


    1. A00484N

      Disengage the 8 clips and 10 claws.

    2. Disengage the 3 guides and remove the quarter trim panel.

  14. Click here

    REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

  15. Click here

    REMOVE CENTER PILLAR UPPER GARNISH RH


    1. A0047UD

      Remove the 2 screws and disengage the clip.

    2. Pass the front seat outer belt through the slit in the center pillar upper garnish and remove the center pillar upper garnish.

  16. Click here

    REMOVE CENTER PILLAR UPPER GARNISH LH

    Tip:

    Use the same procedure as for the RH side.

  17. Click here

    REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

    Click here

  18. Click here

    REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

    Tip:

    Use the same procedure as for the RH side.

  19. Click here

    REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)


    1. A00497F

      Disengage the 2 clips and the 2 guides and remove the front pillar garnish.

    2. for 6 speakers:


      1. Disconnect the connector.

  20. Click here

    REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)

    Tip:

    Use the same procedure as for the RH side.

  21. Click here

    REMOVE NO. 2 ROOM LIGHT ASSEMBLY

    Click here

  22. Click here

    REMOVE JACK HANDLE

  23. Click here

    REMOVE REAR FLOOR FINISH PLATE

    Click here

  24. Click here

    SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH


    1. A0047QW

      Remove the bolt.

    2. Disengage the 2 claws and separate the rear seat 3 point type outer belt.

  25. Click here

    SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

  26. Click here

    REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


    1. A004AWS

      Remove the 3 screws.

    2. Disengage the 3 clips and the 3 claws and remove the deck trim side panel.

  27. Click here

    REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

  28. Click here

    REMOVE ROOF SIDE INNER GARNISH RH


    1. A0048DX

      Disengage the 5 clips.

    2. Pass the rear seat 3 point type outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.

  29. Click here

    REMOVE ROOF SIDE INNER GARNISH LH

    Tip:

    Use the same procedure as for the RH side.

  30. Click here

    REMOVE REAR ROOF SIDE RAIL GARNISH RH


    1. A0049UF

      Disengage the 4 clips and remove the roof side rail garnish.

  31. Click here

    REMOVE REAR ROOF SIDE RAIL GARNISH LH

    Tip:

    Use the same procedure as for the RH side.

  32. Click here

    REMOVE VISOR ASSEMBLY RH


    1. A004AJW

      Remove the visor shaft from the visor holder.

    2. Remove the 2 screws and the visor.

  33. Click here

    REMOVE VISOR ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

  34. Click here

    REMOVE VISOR HOLDER

    Click here

  35. Click here

    REMOVE ASSIST GRIP ASSEMBLY

    Click here

  36. Click here

    REMOVE ASSIST GRIP ASSEMBLY (for Driver Side)

    Tip:

    Use the same procedure as for the assist grip assembly.

  37. Click here

    REMOVE ROOF HEADLINING SERVICE HOLE COVER (for Driver Side without Assist Grip)


    1. A0049QIE02

      Using a screwdriver with its tip wrapped in protective tape, remove the 2 roof headlining service hole covers.

      Table 1. Text in Illustration
      *a Protective Tape
  38. Click here

    REMOVE MAP LIGHT ASSEMBLY

    Click here

  39. Click here

    REMOVE VANITY LIGHT ASSEMBLY (w/ Vanity Light)

    Click here

  40. Click here

    REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

    Click here

  41. Click here

    REMOVE RAIN SENSOR COVER (w/ Rain Sensor)

    Click here

  42. Click here

    REMOVE PRE-CRASH SAFETY 2ND CITY COVER (w/ Toyota Safety Sense)

    Click here

  43. Click here

    REMOVE PRE-CRASH SAFETY CITY COVER (w/ Toyota Safety Sense)

    Click here

  44. Click here

    SEPARATE REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here

  45. Click here

    REMOVE ROOF HEADLINING ASSEMBLY (for Glass Roof)

    Table 2. Text in Illustration
    *a Front Pillar RH Side *b Front Pillar LH Side
    *c Rear Pillar RH Side - -

    1. for front pillar RH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 4 clamps.

    2. for front pillar LH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 4 clamps.

    3. for rear pillar RH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 3 clamps.

    4. Disconnect the connectors.

    5. Disengage the 2 claws.

    6. Using a clip remover, remove the clip.

    7. Disengage the 12 hook-and loop fasteners.

    8. A0047QT

      Remove the roof headlining from the vehicle through the back door as shown in the illustration.

      Note:

      Do not damage the roof headlining assembly or body interior.

  46. Click here

    REMOVE ROOF HEADLINING ASSEMBLY (except Glass Roof)

    Table 3. Text in Illustration
    *a Front Pillar RH Side *b Front Pillar LH Side
    *c Rear Pillar RH Side - -

    1. for front pillar RH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 4 clamps.

    2. for front pillar LH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 4 clamps.

    3. for rear pillar RH side:


      1. Disconnect the connector.

      2. Using a clip remover, disengage the 3 clamps.

    4. Disconnect the connectors.

    5. Disengage the 2 claws.

    6. Using a clip remover, remove the 3 clips.

    7. Disengage the 2 hooks.

    8. A0046T0

      Remove the roof headlining from the vehicle through the back door as shown in the illustration.

      Note:

      Do not damage the roof headlining assembly or body interior.