AIR CONDITIONING PRESSURE SENSOR(for TMC Made) INSTALLATION

PROCEDURE


  1. INSTALL AIR CONDITIONER PRESSURE SENSOR


    1. Remove the attached vinyl tape from the tube and the connecting part of the cooler condenser.

    2. Apply sufficient compressor oil to a new O-ring and the fitting surface of the tube joint.

      Compressor oil
      ND-OIL8 or equivalent.
    3. A01VFY3E01
      Text in Illustration
      *a Turn
      *b Hold

      Using a deep socket wrench 27 mm, install the pressure sensor.

      Torque:
      11 N*m  { 110 kgf*cm, 8 ft.*lbf }

    4. Connect the connector.

  2. CHARGE REFRIGERANT

    Click here

  3. WARM UP ENGINE

    Click here

  4. INSPECT FOR REFRIGERANT LEAK

    Click here