CONDENSER(for 2ZR-FE) REASSEMBLY

PROCEDURE

1. INSTALL COOLER DRYER

   
   

   1. 

      *a

      Modulator

      Using pliers, install the cooler dryer onto the modulator.

   2. 

      Apply sufficient compressor oil to the O-ring and fitting surface of the cap.

      Compressor oil
      ND-OIL 12 or equivalent

   3. 

      *a	14 mm Straight Hexagon Wrench
      *b	Modulator

      Using a 14 mm straight hexagon wrench, install the cap onto the modulator.

      Torque:

      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }