CONDENSER(for 2NR-FKE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM


  2. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  3. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE FRONT AIRBAG SENSOR

    Click here

  5. REMOVE NO. 1 COOLER COVER


    1. A0048EL

      Remove the 2 clips.

    2. Disengage the guide to remove the No. 1 cooler cover.

  6. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A0048G7

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  7. DISCONNECT LIQUID PIPE SUB-ASSEMBLY (for HFC-134a(R134a))


    1. A0047W5

      Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.

    2. Remove the O-ring from the liquid pipe sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  8. DISCONNECT COOLER REFRIGERANT LIQUID PIPE A (for HFO-1234yf(R1234yf))


    1. A0047W5

      Remove the bolt and disconnect the cooler refrigerant liquid pipe A from the cooler condenser.

    2. Remove the O-ring from the cooler refrigerant liquid pipe A.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  9. REMOVE RADIATOR UPPER SUPPORT SUB-ASSEMBLY


    1. A0049W5

      Disconnect the connector.

    2. A00497S

      Disengage the 2 clamps to disconnect the wire harness.

    3. A00494Z

      Disengage the 2 clamps to disconnect the hood lock control cable assembly.

    4. A0048W0

      Remove the 4 bolts and radiator support sub-assembly.

  10. REMOVE COOLER CONDENSER ASSEMBLY


    1. A004BBL

      Disengage the 2 claws.

    2. Disengage the 2 guides to remove the cooler condenser assembly.

      Note

      Do not damage the condenser or radiator when removing the cooler condenser assembly.