CONDENSER(except 1ND-TV) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  3. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE FRONT AIRBAG SENSOR

    Click here

  5. REMOVE NO. 1 COOLER AIR DUCT


    1. A01VETZ

      Remove the clip and No. 1 cooler air duct.

  6. REMOVE RADIATOR UPPER SUPPORT SUB-ASSEMBLY


    1. A01VKKI

      Remove the 2 clips.

    2. A01VM1O

      Disconnect the connector.

    3. A01VGIQ

      Disengage the 2 clamps to disconnect the wire harness.

    4. A01VIOO

      Disengage the 2 clamps to disconnect the hood lock control cable assembly.

    5. A01VHUA

      Remove the 4 bolts and radiator support sub-assembly.

  7. REMOVE NO. 1 COOLER COVER


    1. A01VF92

      Disengage the 2 guides to remove the cooler cover.

  8. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01VKQF

      Remove the bolt to disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  9. DISCONNECT LIQUID TUBE SUB-ASSEMBLY A


    1. A01VIQ7

      Remove the bolt to disconnect the liquid tube sub-assembly A from the cooler condenser assembly.

    2. Remove the O-ring from the liquid tube sub-assembly A.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  10. REMOVE COOLER CONDENSER ASSEMBLY


    1. A01VIAH

      Disengage the 2 claws.

    2. Disengage the 2 guides to remove the cooler condenser assembly.

      Note

      Do not damage the condenser or radiator when removing the cooler condenser assembly.