CONDENSER(for 1ND-TV) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM


  2. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  3. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE FRONT AIRBAG SENSOR

    Click here

  5. REMOVE RADIATOR UPPER SUPPORT SUB-ASSEMBLY


    1. A0049W5

      Disconnect the connector.

    2. A0047AY

      Disengage the clamp and the wire harness.

    3. A004AE5

      Disengage the 2 clamps to disconnect the hood lock control cable sub-assembly.

    4. A0049K6

      Remove the 4 bolts and radiator upper support sub-assembly.

  6. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  7. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A0049DF

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  8. DISCONNECT LIQUID TUBE SUB-ASSEMBLY B


    1. A0049NW

      Remove the bolt to disconnect the liquid tube sub-assembly B from the cooler condenser assembly.

    2. Remove the O-ring from the liquid tube sub-assembly B.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  9. REMOVE COOLER CONDENSER ASSEMBLY


    1. A0049KA

      Disengage the 2 claws.

    2. Disengage the 2 guides and remove the cooler condenser assembly.

      Note

      Do not damage the cooler condenser assembly or radiator assembly when removing the cooler condenser assembly.