CONDENSER(for 1ND-TV) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  3. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE FRONT AIRBAG SENSOR

    Click here

  5. REMOVE RADIATOR UPPER SUPPORT SUB-ASSEMBLY


    1. A01VM1O

      Disconnect the connector.

    2. A01VGIQ

      Disengage the clamp and the wire harness.

    3. A01VHI7

      Disengage the 2 clamps and disconnect the hood lock control cable.

    4. A01VLLI

      Remove the 4 bolts and the radiator support.

  6. REMOVE NO. 1 RADIATOR SIDE AIR SEAL

    Tech Tips

    Use the same procedure as for the No. 2 side Click here.

  7. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01VKWE

      Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler condenser.

    2. Remove the O-ring from the cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  8. DISCONNECT LIQUID TUBE SUB-ASSEMBLY B


    1. A01VLB3

      Remove the bolt and disconnect the liquid tube from the cooler condenser.

    2. Remove the O-ring from the liquid tube.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  9. REMOVE COOLER CONDENSER ASSEMBLY


    1. A01VGJ8

      Disengage the 2 claws.

    2. Disengage the 2 guides and remove the cooler condenser.

      Note

      Do not damage the condenser or radiator when removing the cooler condenser.