COMPRESSOR(for 2ZR-FE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE FAN AND GENERATOR V BELT

    Click here

  3. REMOVE ENGINE UNDER COVER RH

    Click here

  4. REMOVE ENGINE UNDER COVER LH

    Click here

  5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. Disconnect the connector.

    2. B004790

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor with pulley assembly.

    3. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. B0046QL

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor with pulley assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  7. REMOVE COMPRESSOR WITH PULLEY ASSEMBLY


    1. B0047O0

      Remove the 2 bolts and 2 nuts.

    2. B00472X

      Using a "TORX" socket wrench (E8), remove the 2 stud bolts and the compressor with pulley assembly.