COMPRESSOR(for 2NR-FKE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM


  2. REMOVE FAN AND GENERATOR V BELT

    Click here

  3. REMOVE ENGINE UNDER COVER RH

    Click here

  4. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. Disconnect the connector.

    2. A004AGZ

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor with pulley assembly.

    3. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A004B3C

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor with pulley assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. REMOVE COMPRESSOR WITH PULLEY ASSEMBLY


    1. A0048GW

      Remove the 3 bolts and nut.

    2. A00491C

      Using a "TORX" socket wrench (E8), remove the stud bolt and the compressor with pulley assembly.