COOLER EXPANSION VALVE(except 1ND-TV) INSTALLATION

PROCEDURE


  1. INSTALL COOLER EXPANSION VALVE


    1. Apply sufficient compressor oil to 2 new O-rings and fitting surfaces of the cooler expansion valve.

      Compressor oil
      for HFC-134a (R134a)
      ND-OIL 8 or equivalent
      for HFO-1234yf (R1234yf)
      ND-OIL 12 or equivalent

    2. Install the 2 O-rings onto the cooler evaporator.

    3. Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.

      Torque:
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

  2. CONNECT LIQUID TUBE SUB-ASSEMBLY A

    Click here

  3. CONNECT SUCTION TUBE SUB-ASSEMBLY B

    Click here

  4. INSTALL OUTER COWL TOP PANEL

    Click here

  5. INSTALL INNER COWL TOP TO COWL BRACE

    Click here

  6. INSTALL FRONT NO. 1 VENTILATOR SEAL

    Click here

  7. INSTALL FRONT AIR SHUTTER SEAL RH

    Click here

  8. INSTALL WINDSHIELD WIPER MOTOR AND LINK

    Click here

  9. CHARGE REFRIGERANT


  10. WARM UP ENGINE


  11. INSPECT FOR REFRIGERANT LEAK