COOLER EXPANSION VALVE(except 1ND-TV) INSTALLATION

PROCEDURE

1. INSTALL COOLER EXPANSION VALVE

   
   

   1. Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.

      Compressor oil
      ND-OIL8 or equivalent

   2. Install the 2 O-rings onto the cooler evaporator.

   3. Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.

      Torque:

      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

2. CONNECT LIQUID TUBE SUB-ASSEMBLY A

   Click here

3. CONNECT SUCTION TUBE SUB-ASSEMBLY B

   Click here

4. INSTALL OUTER COWL TOP PANEL (for 1KR-FE)

   Click here

5. INSTALL INNER COWL TOP TO COWL BRACE (for 1KR-FE)

   Click here

6. INSTALL FRONT NO. 1 VENTILATOR SEAL (for 1KR-FE)

   Click here

7. INSTALL FRONT AIR SHUTTER SEAL RH (for 1KR-FE)

   Click here

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK (for 1KR-FE)

   Click here

9. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for 1NR-FE)

   Click here

10. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY (for 1NR-FE)

    Click here

11. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for 1NR-FE)

    Click here

12. INSTALL NO. 1 ENGINE COVER (for 1NR-FE)

    Click here

13. CHARGE REFRIGERANT

    Click here

14. WARM UP ENGINE

    Click here

15. INSPECT FOR REFRIGERANT LEAK

    Click here