BLOWER RESISTOR INSPECTION

PROCEDURE


  1. INSPECT BLOWER RESISTOR


    1. A01VJ5QE03
      Text in Illustration
      *a

      Component without harness connected

      (Blower Resistor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 4 Always 3.12 to 3.60 Ω
      3 - 4 Always 1.45 to 1.67 Ω
      2 - 4 Always 0.52 to 0.60 Ω

      • If the result is not as specified, replace the blower resistor.