FRONT BLOWER MOTOR INSPECTION

PROCEDURE


  1. INSPECT BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for LHD)


    1. A01VDUKE03
      Text in Illustration
      *a

      Component without harness connected

      (Blower Motor With Fan Sub-assembly)

      Apply battery voltage to the blower with fan motor sub-assembly and check the operation of the motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      		 The blower motor operates smoothly

      • If the result is not as specified, replace the blower motor with fan sub-assembly.

  2. INSPECT BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for RHD)


    1. A01VLVGE02
      Text in Illustration
      *a

      Component without harness connected

      (Blower Motor With Fan Sub-assembly)

      Apply battery voltage to the blower with fan motor sub-assembly and check the operation of the motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      		 The blower motor operates smoothly

      • If the result is not as specified, replace the blower motor with fan sub-assembly.