COMPRESSOR(for 1ND-TV) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE FAN AND GENERATOR V BELT

    Click here

  3. REMOVE CENTER ENGINE UNDER COVER

  4. REMOVE ENGINE UNDER COVER RH

  5. REMOVE ENGINE UNDER COVER LH

  6. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE


    1. A01VDMJ

      Remove the bolt and disconnect the suction hose from the compressor.

    2. Remove the O-ring from the suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  7. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01VFQ3

      Remove the bolt and disconnect the discharge hose from the compressor.

    2. Remove the O-ring from the discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  8. REMOVE COMPRESSOR WITH PULLEY ASSEMBLY


    1. Disconnect the connector.

    2. A01VIOA

      Remove the 2 bolts and 2 nuts.

    3. A01VKHA

      Using a "TORX" socket wrench (E8), remove the 2 stud bolts and the compressor.