REFRIGERANT LINE(for TMMF Made) REMOVAL

PROCEDURE

1. REMOVE PIPING CLAMP

   
   

   1. While pressing the end of the suction hose into the end of the suction tube, use pliers to squeeze together both sides of the piping clamp until it breaks apart.

      

      *1	Suction Tube	*2	Suction Hose
      *3	Piping Clamp	-	-
      *a	Press In	-	-

      Note

      Make sure that fragments of the piping clamp do not enter the piping.

   2. Separate the suction hose.

      Note

      Clean off any dirt or water near the ends of the suction hose and suction tube.

   3. Remove the 2 O-rings from the suction hose.

      Note

      Wrap the open ends of the separated suction tube and suction hose with vinyl tape to prevent dirt or water from entering.