REAR SEAT INNER BELT ASSEMBLY(for LH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    1. A01UYO4E02
      Text in Illustration
      *a

      Component without harness connected

      (Rear Seat Inner with Center Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Center tongue plate fastened 10 kΩ or higher
      Center tongue plate released Below 1 Ω
      4 - 5 LH side tongue plate fastened 10 kΩ or higher
      LH side tongue plate released Below 1 Ω

      If the result is not as specified, replace the rear seat inner with center belt assembly LH.