REAR SEAT OUTER BELT ASSEMBLY(for 3 Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY (for LH Side)

    Click here

  2. REMOVE REAR SEAT ASSEMBLY (for RH Side)

    Click here

  3. REMOVE DECK BOARD ASSEMBLY

    Click here

  4. REMOVE SPARE WHEEL COVER

    Click here

  5. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (for LH Side)

    Click here

  6. REMOVE JACK HANDLE (for RH Side)

  7. REMOVE REAR FLOOR FINISH PLATE

    Click here

  8. REMOVE FRONT DOOR SCUFF PLATE

    Click here

  9. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Click here

  10. REMOVE FRONT SEAT BELT OUTER BAR SUB-ASSEMBLY

    Click here

  11. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY

    Click here

  12. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    Click here

  13. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)

    Click here

  14. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

    Click here

  15. REMOVE ROOF SIDE INNER GARNISH

    Click here

  16. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY


    1. A000FAF

      Remove the bolt and the shoulder anchor.

    2. A000HX6

      Remove the bolt, disengage the 2 hooks to remove the rear seat 3 point type outer belt assembly.