CAUTION / NOTICE / HINT
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.
Wear protective gloves. Sharp areas on the parts may injure your hands.
Note
Always use "TORX" socket wrench E10 when removing the front seat.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD
Engage the 15 hooks to install the separate type front seat cushion cover to the separate type front seat cushion pad (occupant detection sensor).
INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL FRONT SEAT INNER BELT ASSEMBLY
INSTALL FRONT SEAT CUSHION COVER (for LHD)
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL FRONT SEAT CUSHION INNER SHIELD
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL FRONT SEAT CUSHION SHIELD
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL RECLINING ADJUSTER RELEASE HANDLE
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL FRONT SEAT ASSEMBLY
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL SEAT TRACK OUTER COVER
Tech Tips
Use the same procedure as for the LH side Click here.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSPECT SRS WARNING LIGHT