FRONT SEAT INNER BELT ASSEMBLY(for Front Passenger Side) INSTALLATION

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A00489AE05
      Text in Illustration
      *a Convex

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not place the front seat inner belt assembly over the convex areas of the separate type front seat cushion spring assembly.

    2. Engage the clamp.

    3. Install the 6 clamps. (w/o Seat Heater System)

    4. Connect the occupant detection sensor connector. (w/o Seat Heater System)

    5. Install the 6 clamps. (w/ Seat Heater System)

    6. Connect the occupant detection sensor connector. (w/ Seat Heater System)

    7. Connect the seat heater connector. (w/ Seat Heater System)

  2. INSTALL FRONT SEAT CUSHION COVER (for LHD)

    Click here

  3. INSTALL FRONT SEAT ASSEMBLY (for 5 Door)

    Click here

  4. INSTALL FRONT SEAT ASSEMBLY (for 3 Door)

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSPECT SRS WARNING LIGHT

    Click here