FRONT SEATBACK HEATER(for 5 Door) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

Note

Always use "TORX" socket wrench E10 when removing the front seat.

Tech Tips

The procedure described below is for the driver side. Use the same procedure for both the driver and front passenger sides, unless otherwise specified.

PROCEDURE


  1. INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for TMMF Made)


    1. Engage the 5 hooks to install the separate type front seatback cover to the separate type front seatback pad.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for TMC Made)


    1. A01VK77E01
      Text in Illustration
      *1 New Hog Ring
      *2 Hog Ring Pliers

      Using hog ring pliers, install the separate type front seatback cover (front seatback heater) to the separate type front seatback pad with 6 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  3. INSTALL SEATBACK COVER WITH PAD (for TMC Made)

    Click here

  4. REMOVE SEATBACK COVER WITH PAD (for TMMF Made)

    Click here

  5. INSTALL SEAT ARMREST ASSEMBLY (w/ Armrest)

    Click here

  6. INSTALL SEAT ARMREST HOLE COVER (w/ Armrest)

    Click here

  7. INSTALL FRONT SEAT CUSHION SHIELD INNER LH

    Click here

  8. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  9. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  10. INSTALL FRONT SEAT CUSHION COVER (for LHD)

    Click here

  11. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  12. INSTALL VERTICAL ADJUSTING HANDLE LH (w/ Vertical Adjuster)

    Click here

  13. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  14. INSTALL FRONT SEAT HEADREST ASSEMBLY

    Click here

  15. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  16. INSTALL SEAT TRACK OUTER COVER LH

    Click here

  17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  18. INSPECT SRS WARNING LIGHT

    Click here