FRONT SEATBACK HEATER(for 5 Door) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.
Wear protective gloves. Sharp areas on the parts may injure your hands.

Note

Always use "TORX" socket wrench E10 when removing the front seat.

Tech Tips

The procedure described below is for the driver side. Use the same procedure for both the driver and front passenger sides, unless otherwise specified.

PROCEDURE

PRECAUTION

Note

After turning the ignition switch off, waiting time may be required before disconnecting the cable from battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
REMOVE SEAT TRACK COVER OUTER LH

Click here
REMOVE FRONT SEAT ASSEMBLY LH

Click here
REMOVE FRONT SEAT HEADREST ASSEMBLY

Click here
REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

Click here
REMOVE VERTICAL ADJUSTING HANDLE LH (w/ Vertical Adjuster)

Click here
REMOVE FRONT SEAT CUSHION SHIELD LH

Click here
REMOVE FRONT SEAT CUSHION COVER (for LHD)

Click here
REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

Click here
REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

Click here
REMOVE FRONT SEAT CUSHION INNER SHIELD LH

Click here
REMOVE SEAT ARMREST HOLE COVER (w/ Armrest)

Click here
REMOVE SEAT ARMREST ASSEMBLY (w/ Armrest)

Click here
REMOVE SEATBACK COVER WITH PAD

Click here
REMOVE SEPARATE TYPE FRONT SEATBACK COVER
1. Disengage the 5 hooks to remove the separate type front seatback cover (front seatback heater) from the separate type front seatback pad.