Click here

FRONT SEAT ASSEMBLY(for 3 Door except GRMN) REASSEMBLY

Click here
Click here

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Click here

PROCEDURE


  1. Click here

    INSTALL SEAT TRACK ADJUSTING HANDLE


    1. B00487B

      Engage the 2 hooks to install the seat track adjusting handle.

  2. Click here

    INSTALL SEAT ADJUSTER COVER CAP


    1. B0047LY

      Install the 2 seat adjuster cover caps.

  3. Click here

    INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. B0046XH

      Install the separate type front seatback spring assembly with the 4 bolts.

      42 N*m 428 kgf*cm 31 ft.*lbf
  4. Click here

    INSTALL SEAT LOCK CONTROL CABLE ASSEMBLY (for Front Passenger Side)


    1. B0047LQ

      Engage the 2 cable end and 2 clamps to install the seat lock control cable assembly.

  5. Click here

    INSTALL RECLINING REMOTE CONTROL CABLE ASSEMBLY


    1. B0046W3

      Engage the cable end and 3 clamps to install the reclining remote control cable assembly.

  6. Click here

    INSTALL NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY


    1. B0046UE

      Engage the cable end and clamp.

    2. Engage the nipple end to install the No. 2 seat adjuster control cable assembly.

    3. Install the casing cap.

  7. Click here

    INSTALL RECLINING ADJUSTER EQUALIZING CABLE ASSEMBLY


    1. B0045UU

      Engage the cable end and clamp to install the reclining adjuster equalizing cable assembly.

  8. Click here

    INSTALL SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


    1. B00487Z

      Engage the 2 guides to install the seat cushion edge protector RH.

    2. Install the screw.

  9. Click here

    INSTALL SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


    1. B00464Y

      Engage the 2 guides to install the seat cushion edge protector LH.

    2. Install the screw.

  10. Click here

    INSTALL SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


    1. B0047HH

      Engage the 2 guides to install the seat cushion edge protector RH.

    2. Install the screw.

  11. Click here

    INSTALL SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


    1. B00484F

      Engage the 2 guides to install the seat cushion edge protector LH.

    2. Install the screw.

  12. Click here

    INSTALL FRONT SEAT CUSHION LOWER SHIELD RH (for Driver Side)


    1. B0047EP

      Engage the clip and install the screw.

    2. B0046I3

      Engage the hook to install the front seat cushion lower shield RH as shown in the illustration.

  13. Click here

    INSTALL FRONT SEAT CUSHION LOWER SHIELD LH (for Driver Side)


    1. B0047PE

      Engage the clip and install the screw.

    2. B0045AS

      Engage the hook to install the front seat cushion lower shield LH as shown in the illustration.

  14. Click here

    INSTALL RECLINING ADJUSTER INSIDE COVER RH (for Driver Side)


    1. B00485A

      Engage the guide to install to reclining adjuster inside cover RH.

  15. Click here

    INSTALL RECLINING ADJUSTER INSIDE COVER LH (for Driver Side)


    1. B0045B7

      Engage the guide to install to reclining adjuster inside cover LH.

  16. Click here

    INSTALL FRONT SEAT CUSHION LOWER SHIELD (for Driver Side)


    1. B0046DB

      Engage the 2 claws to install the front seat cushion lower shield.

  17. Click here

    INSTALL FRONT SEAT AIRBAG ASSEMBLY LH


    1. B0047UQ

      Install the front seat airbag assembly LH with the 2 nuts.

      CAUTION:

      • The nuts must not be reused.

      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

      5.5 N*m 56 kgf*cm 49 in.*lbf
    2. B0047OF

      Engage the 2 clamps.

  18. Click here

    INSTALL RECLINING REMOTE CONTROL BASE


    1. B0046E6

      Engage the 4 guides to install the reclining remote control base.

  19. Click here

    INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. B0045AW

      Engage the 5 hooks to install the separate type front seatback cover to the separate type front seatback pad.

  20. Click here

    INSTALL SEATBACK COVER WITH PAD


    1. B0046GN

      Temporary install the front seatback cover with pad.

    2. Install the front seatback cover bracket with the 2 nuts.

      5.5 N*m 56 kgf*cm 49 in.*lbf
      Note:

      • For vehicles with side airbags, the side airbags may not be activated normally unless the front seatback cover is securely installed.

      • Check that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    3. B0045HNE01

      Align the protruding portion of the front seat headrest support with the installation groove of the front seat adjuster frame.

      Table 1. Text in Illustration
      *a Protruding

    4. Engage the 4 claws to install the 2 front seat headrest supports.

    5. B0045GT

      Engage the 2 hooks.

    6. B0047E8

      Engage the hook.

  21. Click here

    INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY


    1. B0046ON

      Connect the cable end to the reclining remote control lever sub-assembly as shown in the illustration.

    2. B0046R9

      Install the reclining remote control lever sub-assembly with the 2 screws.

    3. B0047HP

      Slide down the cover.

    4. B00461B

      Engage the claw to close the cover.

  22. Click here

    INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B0047S1

      Engage the 15 hooks to install the separate type front seat cushion cover to the separate type front seat cushion pad.

  23. Click here

    INSTALL SEAT CUSHION COVER WITH PAD


    1. B00489G

      Engage the 5 hooks to temporary install the seat cushion cover with pad.

    2. B0046MV

      Engage the 2 hooks.

    3. B0047Y6

      Engage the guide to install the occupant detection sensor. (for Front Passenger Side)

    4. B0045GP

      Engage the 4 clamps to install the seat heater wire harness. (w/ Seat Heater System)

    5. B00474O

      Engage the 7 clamps to install the front seat side airbag wire harness.

    6. B00472H

      Engage the 4 hooks to install the seat cushion cover with pad.

    7. B00460H

      Engage the 2 hooks.

    8. B0045PA

      Engage the seat heater wire harness clamp. (w/ Seat Heater System)

    9. B0046O7

      Connect the seat heater connector. (w/ Seat Heater System)

    10. B0047X6

      Fasten the hook and loop fastener.

    11. B0046LB

      Connect the seat cushion cover pad.

  24. Click here

    INSTALL FRONT SEAT CUSHION INNER SHIELD LH


    1. B0045P5

      Engage the 2 claws to install the front seat cushion inner shield.

  25. Click here

    INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  26. Click here

    INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  27. Click here

    INSTALL FRONT SEAT CUSHION COVER (for LHD)


    1. B004625

      Install the front seat cushion cover with the 4 clips.

  28. Click here

    INSTALL FRONT SEAT CUSHION SHIELD LH


    1. B0045CV

      Engage the clip and 2 claws to install the front seat cushion shield LH.

    2. Install the screw.

  29. Click here

    INSTALL VERTICAL ADJUSTING HANDLE LH (for Driver Side)


    1. B0047DD

      Install the vertical adjusting handle LH with the screw.

  30. Click here

    INSTALL RECLINING ADJUSTER RELEASE HANDLE LH


    1. B0048CP

      Engage the claw to install the reclining adjuster release handle LH.

  31. Click here

    INSTALL FRONT SEAT HEADREST ASSEMBLY


    1. Install the front seat headrest assembly.