FRONT SEAT ASSEMBLY(for 5 Door) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips

The procedure described below is for the driver side. Use the same procedure for both the driver to front passenger sides, unless otherwise specified.

PROCEDURE


  1. REMOVE FRONT SEAT HEADREST ASSEMBLY


    1. Remove the front seat headrest assembly.

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01VL0FE03
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the reclining adjuster release handle LH.

  3. REMOVE VERTICAL ADJUSTING HANDLE LH (w/ Vertical Adjuster)


    1. A01VF3V

      Remove the screw to the vertical adjusting handle LH.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH


    1. A01VJW0

      Remove the screw.

    2. Disengage the 2 claws and clip to remove the front seat cushion shield LH.

  5. REMOVE FRONT SEAT CUSHION COVER (for LHD)


    1. A01VEL0

      Remove the 4 clips and the front seat cushion cover.

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  8. REMOVE FRONT SEAT CUSHION INNER SHIELD LH


    1. A01VHUF

      Disengage the 2 claws to remove the front seat cushion inner shield LH.

  9. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01VJI4

      Disconnect the seat cushion cover band.

    2. A01VK3E

      Disconnect the seat heater connector. (w/ Seat Heater System)

    3. A01VFMQ

      Disengage the seat heater wire harness clamp. (w/ Seat Heater System)

    4. A01VEAS

      Unfasten the hook to loop fastener.

    5. A01VLEH

      Disengage the 2 hooks. (for TMMF Made)

    6. A01VF23

      Disengage the 4 hooks.

    7. A01VKLM

      Disengage the 7 clamps to separate the front seat side airbag wire harness.

    8. A01VJIR

      Disengage the 4 clamps to separate the seat heater wire harness. (w/ Seat Heater System)

    9. A01VFEQ

      Disengage the guide to remove the occupant detection sensor connector. (for Front Passenger Side)

    10. A01VGFN

      Disengage the 2 hooks.

    11. Disengage the 5 hooks and remove the seat cushion with pad.

      A01VFFO
  10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for TMC Made)


    1. A01VE5B

      Remove the 2 hog rings.

    2. A01VJ2O

      Remove the 14 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for TMMF Made)


    1. A01VIII

      Disengage the 15 hooks and remove the separate type front seat cushion cover from the separate type front seat cushion pad.

  12. REMOVE SEAT ARMREST HOLE COVER (w/ Armrest)


    1. A01VJR9

      Disengage the 2 claws to remove the seat armrest cover.

  13. REMOVE SEAT ARMREST ASSEMBLY (w/ Armrest)


    1. A01VIFEE01
      Text in Illustration
      *1 Wave washer
      *2 Plate Washer

      Remove the bolt, 2 washer and the seat armrest assembly.

  14. REMOVE SEATBACK COVER WITH PAD (for TMC Made)


    1. A01VK23

      Remove the 3 hog rings.

    2. A01VEMN

      Remove the 3 hog rings.

    3. A01VITM

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    4. A01VK1F

      Remove the 2 nuts and the seatback bracket.

    5. Remove the front seatback cover with pad.

  15. REMOVE SEATBACK COVER WITH PAD (for TMMF Made)


    1. A01VJ6W

      Disengage the hook.

    2. A01VG6O

      Disengage the 2 hooks.

    3. A01VITM

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    4. A01VEXC

      Remove the 2 nuts and the seatback bracket.

    5. Remove the front seatback cover with pad.

  16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER (for TMC Made)


    1. A01VIOE

      Remove the 6 hog rings and the separate type front seatback cover from the separate type front seatback pad.

  17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER (for TMMF Made)


    1. A01VEBY

      Disengage the 5 hooks and remove the separate type front seatback cover from the separate type front seatback pad.

  18. REMOVE FRONT SEAT AIRBAG ASSEMBLY LH


    1. A01VIS4

      Disengage the 2 clamps.

    2. A01VGAU

      Remove the 2 nuts and the front seat side airbag assembly LH

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  19. REMOVE FRONT SEAT CUSHION LOWER SHIELD (w/ Vertical Adjuster)


    1. A01VKAU

      Disengage the 2 claws to remove the front seat cushion lower shield.

  20. REMOVE RECLINING ADJUSTER INSIDE COVER RH (for TMC Made)


    1. A01VI76

      Disengage the guide to remove the reclining adjuster inside cover RH.

  21. REMOVE RECLINING ADJUSTER INSIDE COVER LH (for TMC Made)


    1. A01VJ3N

      Disengage the guide to remove the reclining adjuster inside cover LH.

  22. REMOVE FRONT SEAT CUSHION LOWER SHIELD RH (w/ Vertical Adjuster)


    1. A01VDX7

      Disengage the hook as shown in the illustration.

    2. A01VDUY

      Remove the screw.

    3. Disengage the clip to remove the front seat cushion lower shield RH.

  23. REMOVE FRONT SEAT CUSHION LOWER SHIELD LH (w/ Vertical Adjuster)


    1. A01VJJQ

      Disengage the hook as shown in the illustration.

    2. A01VL2D

      Remove the screw.

    3. Disengage the clip to remove the front seat cushion lower shield LH.

  24. REMOVE SEAT CUSHION EDGE PROTECTOR RH (w/ Vertical Adjuster)


    1. A01VJ3U

      Remove the screw.

    2. Disengage the 2 guides to remove the seat cushion edge protector RH.

  25. REMOVE SEAT CUSHION EDGE PROTECTOR LH (w/ Vertical Adjuster)


    1. A01VLRB

      Remove the screw.

    2. Disengage the 2 guides to remove the seat cushion edge protector LH.

  26. REMOVE SEAT CUSHION EDGE PROTECTOR RH (w/o Vertical Adjuster)


    1. A01VEA0

      Remove the screw.

    2. Disengage the 2 guides to remove the seat cushion edge protector RH.

  27. REMOVE SEAT CUSHION EDGE PROTECTOR LH (w/o Vertical Adjuster)


    1. A01VG8A

      Remove the screw.

    2. Disengage the 2 guides to remove the seat cushion edge protector LH.

  28. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A01VHSJ

      Remove the 4 bolts and separate type front seatback spring assembly.

  29. REMOVE SEAT ADJUSTER COVER CAP


    1. A01VIAM

      Remove the 2 seat adjuster cover caps.

  30. REMOVE SEAT TRACK ADJUSTING HANDLE


    1. A01VFXH

      Disengage the 2 hooks to remove the seat track adjusting handle.