CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the No. 2 side airbag sensor assemblies.
PROCEDURE
INSPECT NO. 2 SIDE AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check (See page SUPPLEMENTAL RESTRAINT SYSTEMS > AIRBAG SYSTEM (w/ VSC) > DTC CHECK / CLEAR).
INSPECT NO. 2 SIDE AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag has not Deployed)
Perform a diagnostic system check (See page SUPPLEMENTAL RESTRAINT SYSTEMS > AIRBAG SYSTEM (w/ VSC) > DTC CHECK / CLEAR).
Visually check the No. 2 side airbag sensor assemblies for defects if a quarter panel of the vehicle or the area around a quarter panel is damaged.
The defects are as follows:
Cracks on the sensor housing
Dents on the sensor housing
Chips on the sensor housing
Cracks or other damage to the connector
Damage to the serial number
| OK |
|---|
| No defects are found. |
Tech Tips
If any of the defects is found, replace the No. 2 side airbag sensor assembly with a new one.
INSPECT NO. 2 SIDE AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag has Deployed)
When airbags have deployed as the result of a collision, be sure to replace all No. 2 side airbag sensor assemblies in the damaged areas (anywhere in need of repair).
Visually check the No. 2 side airbag sensor assemblies in undamaged areas for defects.
The defects are as follows:
Cracks on the sensor housing
Dents on the sensor housing
Chips on the sensor housing
Cracks or other damage to the connector
Damage to the serial number
| OK |
|---|
| No defects are found. |
Tech Tips
If any of the defects is found or a No. 2 side airbag sensor assembly has detected a major collision, replace the No. 2 side airbag sensor assembly with a new one.