Click here

CURTAIN SHIELD AIRBAG ASSEMBLY(for 5 Door) ON-VEHICLE INSPECTION

Click here
Click here Click here

PROCEDURE


  1. Click here

    INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


    1. A01VH6Y

      Perform a diagnostic system check (See page SUPPLEMENTAL RESTRAINT SYSTEMS > AIRBAG SYSTEM (w/ VSC) > DIAGNOSIS SYSTEM).

    2. With the curtain shield airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the front pillar garnish or roof headlining with a new one:


      • Any cuts, minute cracks or marked discoloration on the front pillar garnish and roof headlining around the curtain shield airbag.

  2. Click here

    INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag has not Deployed)

    CAUTION:

    For curtain shield airbag removal and installation procedures, see pages andClick here, and carefully follow the correct procedure.


    1. A01VKN2

      Perform a diagnostic system check (See page SUPPLEMENTAL RESTRAINT SYSTEMS > AIRBAG SYSTEM (w/ VSC) > DIAGNOSIS SYSTEM).

    2. With the curtain shield airbag removed from the vehicle, if there are any defects, such as those mentioned below, replace the curtain shield airbag with a new one:


      • Any cuts, minute cracks or marked discoloration on the curtain shield airbag.

      • Any cracks or other damage to the connector.