AIRBAG SYSTEM(w/o Curtain Shield Airbag) CHECK MODE PROCEDURE

CHECK MODE (SIGNAL CHECK): DTC CHECK

1. Connect the intelligent tester to the DLC3.

2. Turn the ignition switch to ON.

3. Select Signal Check, and proceed with checking using the intelligent tester.

   Note:

   Select Signal Check from the DTC Check screen displayed on the intelligent tester to clear the output DTCs (both present and past).

   Tip:
   

   • DTCs can be detected more sensitively in check mode than in normal diagnosis mode.

   • Perform the check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through the normal diagnosis mode inspection.