Click here

AIRBAG SYSTEM(w/o VSC) HOW TO PROCEED WITH TROUBLESHOOTING

Click here
Click here Click here
DTC Code DTC Name
  HOW TO PROCEED WITH TROUBLESHOOTING
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the following procedure to troubleshoot the airbag system.

  • *: Use the intelligent tester.

Click here

PROCEDURE


  1. Click here

    VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

  2. Click here

    CUSTOMER PROBLEM ANALYSIS


    1. Confirm problem symptoms.

      Click here

      Result
      Proceed to
      NEXT

  3. Click here

    CHECK CAN COMMUNICATION SYSTEM*


    1. Use the intelligent tester to check if the CAN communication system is functioning normally.

      Tip:

      • Refer to Bus Check for the CAN communication system.

        Click here

      • The airbag sensor assembly is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the CAN communication system.

      Result
      Result Proceed to
      CAN communication DTC is not output. A
      CAN communication DTC is output. B

  4. Click here

    SRS WARNING LIGHT CHECK


    1. Proceed to Diagnosis System.

      Click here

      Result
      Proceed to
      NEXT

  5. Click here

    CHECK FOR DTC*


    1. Proceed to DTC Check / Clear.

      Click here

      Result
      Result Proceed to
      DTC is output. A
      DTC is not output. B

  6. Click here

    DIAGNOSTIC TROUBLE CODE CHART


    1. Proceed to Diagnostic Trouble Code Chart.

      Click here

      Result
      Proceed to
      NEXT

  7. Click here

    SYMPTOM SIMULATION


    1. Proceed to Diagnosis System.

      Click here

      Result
      Proceed to
      NEXT

  8. Click here

    PROBLEM SYMPTOMS TABLE


    1. Proceed to Problem Symptoms Table.

      Click here

      Result
      Proceed to
      NEXT

  9. Click here

    CIRCUIT INSPECTION*

    Result
    Proceed to
    NEXT

  10. Click here

    IDENTIFICATION OF PROBLEM

    Result
    Proceed to
    NEXT

  11. Click here

    REPAIR OR REPLACEMENT

    Result
    Proceed to
    NEXT

  12. Click here

    CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    • NEXT

      END