Click here

AIRBAG SYSTEM(w/ VSC), Diagnostic DTC:B1630/23

Click here
Click here Click here
DTC Code DTC Name
B1630/23 Rear Airbag Sensor RH Circuit Malfunction
Click here

DESCRIPTION

The No. 2 side airbag sensor assembly RH consists of the safing sensor, the diagnostic circuit, the lateral deceleration sensor, etc.

If the airbag sensor assembly receives signals from the lateral deceleration sensor, it determines whether the SRS should be activated.

DTC B1630/23 is recorded when a malfunction is detected in the No. 2 side airbag sensor assembly RH circuit.

DTC No. DTC Detection Condition Trouble Area
B1630/23

When one of following conditions is met:


  • No. 2 side airbag sensor assembly RH malfunction

  • Airbag sensor assembly malfunction

  • No. 2 side airbag sensor assembly RH

  • Airbag sensor assembly
A01VI1PE11
Table 2. for 5 Door
*a Side Airbag Sensor Assembly RH
*b No. 2 Side Airbag Sensor Assembly RH
*c Airbag Sensor Assembly
Table 1. for 3 Door *a No. 2 Side Airbag Sensor Assembly RH *b Door Side Airbag Sensor RH *c Airbag Sensor Assembly
Click here

WIRING DIAGRAM

Click here

PROCEDURE


  1. Click here

    CHECK NO. 2 SIDE AIRBAG SENSOR ASSEMBLY RH


    1. Turn the ignition switch off.

    2. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    3. A01VF4TE01

      Interchange the No. 2 side airbag sensor assembly RH with No. 2 side airbag sensor assembly LH and connect the connectors to them.

      Table 3. Text in Illustration
      *A for 3 Door
      *B for 5 Door
      *1 No. 2 Side Airbag Sensor Assembly LH
      *2 Airbag Sensor Assembly
      *3 Side Airbag Sensor RH

    4. Connect the cable to the negative battery terminal, and wait for at least 2 seconds.

    5. Turn the ignition switch to ON, and wait for at least 60 seconds.

    6. Clear the DTCs stored in the memory (Click here).

    7. Turn the ignition switch off.

    8. Turn the ignition switch to ON, and wait for at least 60 seconds.

    9. Check for DTCs (Click here).

      Table 4. Result
      Result Proceed to
      DTC B1630/23 and B1635/24 are not output A
      DTC B1635/24 is output (for 3 Door) B
      DTC B1635/24 is output (for 5 Door) C
      DTC B1630/23 is output D
      Tip:

      DTCs other than B1630/23 and B1635/24 may be output at this time, but they are not related to this check.

    10. Turn the ignition switch off.

    11. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    12. Return the No. 2 side airbag sensor assembly LH and the No. 2 side airbag sensor assembly RH to their original positions and connect the connectors to them.


    • A

      USE SIMULATION METHOD TO CHECK (Click here)

    • B

      REPLACE NO. 2 SIDE AIRBAG SENSOR ASSEMBLY RH (Click here)

    • C

      REPLACE NO. 2 SIDE AIRBAG SENSOR ASSEMBLY RH (Click here)

    • D

      REPLACE AIRBAG SENSOR ASSEMBLY (Click here)