AIRBAG SYSTEM(w/o VSC), Diagnostic DTC:B1695/16

DTC Code DTC Name
B1695/16 Door Side Airbag Sensor LH Malfunction

DESCRIPTION

The door side airbag sensor LH consists of the safing sensor, the diagnostic circuit, the lateral deceleration sensor, etc.

If the airbag sensor assembly receives signals from the lateral deceleration sensor, it determines whether the SRS should be activated.

DTC B1695/16 is recorded when a malfunction is detected in the door side airbag sensor LH circuit.

DTC No. DTC Detection Condition Trouble Area
B1695/16

When one of following conditions is met:


  • Door side airbag sensor LH malfunction

  • Airbag sensor assembly malfunction

  • Door side airbag sensor LH

  • Airbag sensor assembly

WIRING DIAGRAM

A01VJKQE06
*a Door Side Airbag Sensor LH
*b Airbag Sensor Assembly

PROCEDURE


  1. CHECK DTC

    A01VFW5E02
    Text in Illustration
    *1 Door Side Airbag Sensor RH
    *2 Airbag Sensor Assembly

    1. Turn the ignition switch off.

    2. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    3. Interchange the door side airbag sensor LH with door side airbag sensor RH and connect the connectors to them.

    4. Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.

    5. Turn the ignition switch to ON, and wait for at least 60 seconds.

    6. Clear the DTCs stored in the memory Click here.

    7. Turn the ignition switch off.

    8. Turn the ignition switch to ON, and wait for at least 60 seconds.

    9. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC B1690/15 and B1695/16 are not output. A
      DTC B1695/16 is output. B
      DTC B1690/15 is output. C

      Tech Tips

      DTCs other than B1690/15 and B1695/16 may be output at this time, but they are not related to this check.

    10. Turn the ignition switch off.

    11. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    12. Return the door side airbag sensor LH and door side airbag sensor RH to their original positions and connect the connectors to them.


    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE AIRBAG SENSOR ASSEMBLY Click here

    C

    REPLACE DOOR SIDE AIRBAG SENSOR LH Click here