COMBINATION METER INSTALLATION

PROCEDURE

1. INSTALL COMBINATION METER ASSEMBLY

   
   

   1. Connect the 2 connectors.

   2. Engage the 2 guides and 2 clips.

   3. Install the combination meter assembly with the 2 screws.

2. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

4. INSPECT SRS WARNING LIGHT

   Click here