METER / GAUGE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   VEHICLE BROUGHT TO WORKSHOP

   Result
   Proceed to NEXT

   
   
   • NEXTClick here
2. Click here

   INSPECT BATTERY VOLTAGE

   Standard voltage
   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

   Result
   Proceed to NEXT

   
   
   • NEXTClick here
3. Click here

   CHECK CAN COMMUNICATION SYSTEM*

   
   

   1. Use an intelligent tester to check if the CAN communication system is functioning normally.

      Result
      Result Proceed to CAN DTC is not output A CAN DTC is output B

   
   
   • AClick here
   • B

     GO TO CAN COMMUNICATION SYSTEMClick here

4. Click here

   PROBLEM SYMPTOMS TABLE

   Result
   Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B

   
   
   • AClick here
   • BClick here

     GO TO STEP 6

5. Click here

   OVERALL ANALYSIS AND TROUBLESHOOTING

   
   

   1. Data List / Active Test.

      Click here

   2. Terminals of ECU.

      Click here

   3. On-vehicle Inspection.

      Click here

      Result
      Proceed to NEXT

   
   
   • NEXTClick here
6. Click here

   ADJUST, REPAIR OR REPLACE

   Result
   Proceed to NEXT

   
   
   • NEXTClick here
7. Click here

   CONFIRMATION TEST*

   Result
   Proceed to NEXT

   
   
   • NEXT

     END