METER GAUGE AND WARNING INDICATOR
| Item | Signal Description |
|---|---|
| Speedometer | Indicates vehicle speed based on signals received from brake actuator assembly (CAN). |
| Tachometer | Indicates engine speed based on signals from ECM (CAN). |
| Fuel Gauge | Indicates fuel level in accordance with signals received from fuel sender gauge (Direct line). |
| ODO/TRIP meter | Calculates accumulated total vehicle travel distance and vehicle travel distance since mode switch pressed. |
| Item | Signal Description |
|---|---|
| TURN | Receives turn signal from headlight dimmer switch assembly (Direct line). |
| BEAM | Receives high beam signal from DIM relay (Direct line). |
| TAIL | Receives taillight signal from TAIL relay (Direct line). |
| REAR FOG | Receives rear fog light signal from FOG RR relay (Direct line). |
| FRONT FOG*2 | Receives front fog light signal from FOG FR relay (Direct line). |
| BRAKE |
|
| ABS | Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN). |
| OIL PRESSURE | except 1ND-TV with DPF: Receives engine oil pressure warning signal from engine oil pressure switch (Direct line). for 1ND-TV with DPF: Receives engine oil pressure warning signal from ECM (CAN). |
| MIL | Receives malfunction check engine warning signal from ECM (Direct line). |
| D+P BELT |
|
| AIRBAG | Receives malfunction signal from airbag ECU assembly (CAN). |
| Engine coolant temperature HOT | Receives engine coolant temperature signal from ECM (CAN). |
| Engine coolant temperature COOL | Receives engine coolant temperature signal from ECM (CAN). |
| CHARGE | Receives malfunction signal from ECM (CAN). |
| DOOR | Open door indicator illuminates when receiving signal from main body ECU (multiplex network body ECU) (CAN). |
| FUEL | Receives remaining fuel signal from fuel sender gauge assembly (Direct line). |
| EPS | Receives malfunction signal from power steering ECU (CAN). |
| CVT SPORT*9 | Receives CVT sport indicator signal from ECM (CAN). |
| VSC OFF*3 | Receives VSC off signal from brake actuator assembly (skid control ECU) (CAN). |
| SLIP*3 | Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN). |
| TRC OFF*3 | Receives TRC off signal from brake actuator assembly (skid control ECU) (CAN). |
| ENTRY KEY*4 | Receives signal from certification ECU (smart key ECU assembly) (CAN). |
| GLOW*5 | Receives the glow signal from the ECM (CAN). |
| SEDIMENT*5 | Receives sediment signal from level warning switch (Direct line). |
| OIL LEVEL*5 | Receives the engine oil level signal from engine oil level sensor (Direct line). |
| OIL MAINTENANCE*5 | Calculates accumulated total vehicle travel distance. |
| CRUISE*10 | Receives cruise main indicator signal from ECM (CAN). |
| CRUISE SET*10 | Receives cruise set indicator signal from ECM (CAN). |
| ASL*11 | Receives ASL main indicator signal from ECM (CAN). |
| DPF WARNING*5 | Receives DPF status signal from the ECM (CAN). |
| ECO*6 | Receives ecology light indicator signal from the ECM (CAN) and illuminates when the vehicle is being driven ECO-friendly. |
| Gear Shift Indicator (Shift UP/DOWN)*7 | Receives shift up/down signal from the ECM (CAN). |
| Stop and start cancel*8 | Receives eco off indicator light signal from the engine stop and start ECU (CAN). |
| Stop and start*8 | Receives ECO indicator light signal from the engine stop and start ECU (CAN). |
| P shift position indicator*9 | Receives a P signal from the ECM (CAN). |
| R shift position indicator*9 | Receives an R signal from the ECM (CAN). |
| N shift position indicator*9 | Receives an N signal from the ECM (CAN). |
| D shift position indicator*9 | Receives a D signal from the ECM (CAN). During oil level confirmation mode, receives an A/T oil temperature signal and indicates the A/T oil temperature by turning off / blinking / turning on the shift position D indicator. |
| Transaxle range indicator (1 to 7)*9 | Receives a signal (1 to 7) from the ECM (CAN). |
| Mode indicator*9 | Receives a mode signal from the ECM (CAN). |
| TIRE PRESSURE*1 | Receives malfunction signal from main body ECU (multiplex network body ECU) (CAN). |
| Automatic high beam indicator*12 | Receives automatic high beam indicator signal from main body ECU (multiplex network body ECU) (CAN). |
| PCS warning*12 | Receives PCS warning signal or off signal from pre-crash safety city sensor (CAN). |
| PCS activation indicator*12 | Receives PCS activation signal from pre-crash safety city sensor (CAN). |
| Lane marker indicator*12 | Receives lane marker indicator signal from pre-crash safety city sensor (CAN). |
| Lane departure alert indicator*12 | Receives lane departure alert indicator signal from pre-crash safety city sensor (CAN). |
*1: w/ Tire Pressure Warning System
*2: w/ Front Fog Light
*3: w/ VSC
*4: w/ Entry and Start System
*5: for 1ND-TV
*6: w/ ECO Driving Indicator
*7: for Manual Transaxle
*8: w/ Stop and Start System
*9: for CVT
*10: w/ Cruise Control System
*11: w/ ASL
*12: w/ Toyota Safety Sense
| Item | Signal Description |
|---|---|
| LIGHT Reminder | Buzzer ON: When ignition switch is off, light control switch is in TAIL position, and driver side door is open. |
| KEY Reminder*1 | Buzzer ON: Ignition switch is off, key is inserted, and driver side door is open. |
| Seat Belt Warning (driver and passenger seat belt) | Buzzer ON: When ignition switch is ON, driver or passenger seat belt is unfastened, and vehicle speed is 20 km/h (12.4 mph) or more. |
| Seat Belt Warning (rear seat belt)*2 | Buzzer ON: When ignition switch is ON, rear seat belt is unfastened, and vehicle speed is 20 km/h (12.4 mph) or more. |
| ENTRY KEY Warning*3 | Buzzer ON: Receives signal from certification ECU (smart key ECU assembly). |
| PKB Reminder | Buzzer ON: When ignition switch is ON, parking brake is operating, and vehicle speed is 5 km/h (3.1 mph) or more. |
| Immobiliser*3 | Buzzer ON: Receives signal from certification ECU (smart key ECU assembly). |
| Sports shift reject | Buzzer ON: Receives signal from the ECM. |
| EPS buzzer | Buzzer ON: Receives signal from the power steering ECU assembly. |
| Warning of driving with door open | Buzzer ON: When ignition switch is ON, vehicle speed is 5 km/h (3.1 mph) or more, and each door is open. |
| Lane departure alert warning buzzer*4 | Buzzer ON: Receives Lane departure alert warning buzzer signal from pre-crash safety city sensor (CAN). |
| Meter buzzer*4 | Buzzer ON: Receives Buzzer control flag signal from precollision safety city sensor (CAN). |
*1: w/o Entry and Start System
*2: w/ Rear Seat Belt Warning System
*3: w/ Entry and Start System
*4: w/ Toyota Safety Sense
| Item | Signal Description | |
|---|---|---|
| Cruise information |
|
The display can be switched using the MODE switch located on the lower left of the combination meter. |
*1: w/ Stop and Start System
*2: w/ ASL
LED CHECK
Check the indicator/warning light operation according to the condition(s) in the table below.
| Indicator/Warning Light | Specification |
|---|---|
| BRAKE, ABS, VSC OFF*5, SLIP, TRC OFF, TIRE PRESSURE*6, OIL LEVEL*1, OIL MAINTENANCE*1, DPF*1, ECO*2, SEDIMENTER*1, Engine coolant temperature HOT | Indicator/Warning light comes on for about 3 seconds after turning the ignition switch to ON. |
| AIRBAG | Warning light comes on for about 6 seconds after turning the ignition switch to ON. |
| OIL PRESSURE, CHECK ENGINE, CHARGE, EPS, ECO*3, SHIFT UP/DOWN*4 | Indicator/Warning light comes on after turning the ignition switch to ON and the indicator light goes off after the engine starts. |
*1: for 1ND-TV
*2: w/ ECO Driving Indicator
*3: w/ Stop and Start System
*4: for Manual Transaxle
*5: w/ VSC
*6: w/ Tire Pressure Warning System