FOOTWELL LIGHT INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. A01VKF5E21
      Text in Illustration
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly LH)

      Apply battery voltage to the connector and check the No. 1 interior illumination light assembly comes on.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 No. 1 interior illumination light comes on

      If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

  2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH


    1. A01VKF5E21
      Text in Illustration
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly RH)

      Apply battery voltage to the connector and check the No. 1 interior illumination light assembly comes on.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 No. 1 interior illumination light comes on

      If the result is not as specified, replace the No. 1 interior illumination light assembly RH.