VANITY LIGHT INSPECTION

PROCEDURE


  1. INSPECT VANITY LIGHT ASSEMBLY


    1. A01VJRRE01
      Text in Illustration
      *a

      Component without harness connected

      (Vanity Light Assembly)

      Apply battery voltage to the connector and check the vanity light comes on.

      OK
      Measurement Condition Switch Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Switch off Vanity light not comes on
      Switch on Vanity light comes on

      If the result is not as specified, replace the vanity light bulb or vanity light assembly.