BACK DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR LOCK ASSEMBLY (for TMC Made)


    1. Measure the resistance according to the value(s) in the table below.

      A01VHSAE01
      Text in Illustration
      *1 Latch
      *a Locked
      *b Unlocked
      *c

      Component without harness connected

      (Back Door Lock Assembly)
      Standard Resistance
      Tester Connection Condition Specified Condition
      2(ACT-) - 3(D+) Unlocked Below 1 Ω
      Locked 10 kΩ or higher

      If the result is not specified, replace the back door lock assembly.

  2. INSPECT BACK DOOR LOCK ASSEMBLY (for TMMF Made)


    1. Measure the resistance according to the value(s) in the table below.

      A01VGONE01
      Text in Illustration
      *1 Latch
      *a Locked
      *b Unlocked
      *c

      Component without harness connected

      (Back Door Lock Assembly)
      Standard Resistance
      Tester Connection Condition Specified Condition
      2(ACT-) - 3(D+) Unlocked Below 1 Ω
      Locked 10 kΩ or higher

      If the result is not specified, replace the back door lock assembly.