LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (INT)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the intelligent tester.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Main Body / Utility / Customize / Illuminated Entry.

      5. Select the setting by referring to the table below.

        Illuminated Entry
        Display Default Content Setting Relevant ECU
        Lighting Time 15 s A function that changes the duration that the lights remain on after closing the doors (the lights quickly fade out when the ignition switch is turned to ACC or ON). 15 s / 7.5 s / 30 s Main body ECU
        I/L when ACC OFF ON A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the lights turn on when the room light switch are set to DOOR). OFF or ON Main body ECU
        I/L ON W/Door Key Unlock ON A function that turns on the lights when the door is unlocked (the lights turn on when the room light switch are set to DOOR). OFF or ON Main body ECU
        Room Light when Aprchd*1 ON A function that turns on the lights when the key is brought within the vehicle exterior detection area (the lights turn on when each room light switch is set to DOOR). OFF or ON Main body ECU
        Interior Light Control ON A function that turns on the lights when the illuminated entry system operates (the lights turn on when the map light switch is set to DOOR).*2 OFF or ON Main body ECU

        • *1: w/ Entry and Start System

        • *2: Refer to System Description for the lights that are controlled by the illuminated entry system.

          Click here

    2. Customizing using the navigation receiver assembly.*1


      • *1: for Navigation Receiver Type


      1. Turn the ignition switch to ON.

      2. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Lights Settings.

      3. Select the setting by referring to the table below.

        Illuminated Entry
        Display Default Content Setting Relevant ECU
        Interior Lights Off Timer 15 sec. Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON.) 7.5 sec., 15 sec. or 30 sec. Main body ECU