LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (INT)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the intelligent tester.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Main Body / Utility / Customize / Illuminated Entry.

      5. Select the setting by referring to the table below.

        Illuminated Entry
        Display Default Content Setting Relevant ECU
        Lighting Time 15 s A function that changes the duration that the lights remain on after closing the doors (the lights quickly fade out when the ignition switch is turned to ACC or ON). 15 s / 7.5 s / 30 s Main body ECU
        I/L when ACC OFF ON A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the lights turn on when the room light switch are set to DOOR). OFF or ON Main body ECU
        I/L ON W/Door Key Unlock ON A function that turns on the lights when the door is unlocked (the lights turn on when the room light switch are set to DOOR). OFF or ON Main body ECU
        Light Control ON Not available. OFF or ON -
        Room Light when Aprchd*1 ON A function that turns on the lights when the key is brought within the vehicle exterior detection area (the lights turn on when each room light switch is set to DOOR). OFF or ON Main body ECU
        Inside Foot Light ON Not available. OFF or ON -

        *1: w/ Entry and Start System