DOOR CONTROL RELAY REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Tech Tips

    Use the same procedure as for the LHD Click here.

  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)

    Tech Tips

    Use the same procedure as for the LHD Click here.

  6. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

    Tech Tips

    Use the same procedure as for the LHD Click here.

  7. REMOVE DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY


    1. B0045QHE02
      Text in Illustration
      *1 Instrument Panel Reinforcement Assembly

      Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the guide and remove the double lock door control relay.