WIRELESS DOOR LOCK BUZZER INSPECTION

PROCEDURE


  1. INSPECT WIRELESS DOOR LOCK BUZZER


    1. A01VJ4LE03
      Text in Illustration
      *a

      Component without harness connected

      (Wireless Door Lock Buzzer)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 285 to 315 Ω

      Tech Tips

      The buzzer activation circuit is built into the ECU, not into the buzzer itself. Even if battery voltage is applied directly to the buzzer, the buzzer will not sound.

      If the result is not as specified, replace the wireless door lock buzzer.