DOOR CONTROL TRANSMITTER(w/o Entry and Start System) REMOVAL

CAUTION / NOTICE / HINT

Note

Special caution should be taken when handling precision electronic components.

PROCEDURE


  1. REMOVE TRANSMITTER HOUSING COVER


    1. A01V0AVE01
      Text in Illustration
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the transmitter housing cover as shown in the illustration.

      Note


      • Do not use excessive force when prying apart the transmitter housing cover.

      • Remove the transmitter housing cover while the switches face downward to prevent the switch knob from falling.

  2. REMOVE TRANSMITTER BATTERY

    Click here