WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) DIAGNOSIS SYSTEM


  1. CHECK DLC3


    1. Check the DLC3 Click here.

  2. INSPECT BATTERY VOLTAGE

    Measure the battery voltage.

  3. SELF-DIAGNOSTIC MODE (USING INTELLIGENT TESTER)


    1. Switch to self-diagnostic mode.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the intelligent tester on.

      4. Enter following menus: Body / Main Body / Utility / Wireless Door Lock Diagnosis Mode

      5. Proceed to the next step in accordance with the prompts on the intelligent tester screen.

      6. A01VLRAE14
    4. Interior Light Output
    *1 ON
    *2 OFF
    *3 T1: 0.25 seconds
    *4 T2: 0.5 seconds

Check that the system has switched to self-diagnostic mode by checking the interior light output pattern.

  • Check the diagnostic outputs when the door control transmitter switch is held down. The diagnostic outputs can be checked by the interior light patterns.

    A01VIF1E22