WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Note

    In the table below, the values listed under Normal Condition are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body or Entry & Start / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      RR Door Courtesy SW Rear door courtesy light switch RH signal / OFF or ON

      OFF: Rear door RH closed

      ON: Rear door RH opened

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH signal / OFF or ON

      OFF: Rear door LH closed

      ON: Rear door LH opened

      		 -
      Back Door Courtesy SW Back door courtesy switch signal / OFF or ON

      OFF: Back door is closed

      ON: Back door is open

      		 -
      FR Door Lock Pos Front door unlock detection switch RH signal / LOCK or UNLOCK

      LOCK: Front RH door locked

      UNLOCK: Front RH door unlocked

      		 -
      FR Door Courtesy Front RH door courtesy light switch signal / ON or OFF

      ON: Front RH door closed

      OFF: Front RH door opened

      		 -
      FL Door Lock Pos Front door unlock detection switch LH signal / LOCK or UNLOCK

      LOCK: Front LH side door locked

      UNLOCK: Front LH side door unlocked

      		 -
      FL Door Courtesy Front LH door courtesy light switch signal / ON or OFF

      ON: Front LH door closed

      OFF: Front LH door opened

      		 -
      RR-Door Lock Pos Rear door unlock detection switch LH and RH signal / OFF or ON

      OFF: Rear door LH and RH locked

      ON: Rear door LH or RH unlocked

      		 -
      RL-Door Lock Pos Rear door unlock detection switch LH and RH signal / OFF or ON

      OFF: Rear door LH and RH locked

      ON: Rear door LH or RH unlocked

      		 -
      Wireless Control Wireless door lock control function / OFF or ON Customized setting displayed -
      Hazard Answer Back Hazard answer back of wireless / OFF or ON Customized setting displayed -
      Open Door Warning Open door warning / OFF or ON Customized setting displayed -
      Auto Lock Time Automatic lock time / 30 s, 60 s or 120 s Customized setting displayed -
      Entry and Start
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      C Code Difference Status of the Different Rolling Code / No or Yes

      No: Key rolling code matched to vehicle

      Yes: Key rolling code not matched to vehicle

      		 -
      ID Code Difference Status of the ID Code Difference / No or Yes

      No: Key ID code matched to vehicle

      Yes: Key ID code not matched to vehicle

      		 -

  2. PERFORM ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

    Main Body
    Tester Display Test Part Control Range Diagnostic Note
    Illuminated Entry System Interior light (Interior light switch is in DOOR position and all doors are closed) OFF / ON -
    Door Lock Operate door lock motor Lock / Unlock OFF / Lock / Unlock -
    Wireless Buzzer Wireless door lock buzzer OFF / ON -