CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Wireless Control | ON | Function that turns wireless door lock function ON or OFF | ON or OFF | Main body ECU |
| Hazard Answer Back | ON | When lock switch on electrical key transmitter sub-assembly pressed, all hazard warning lights illuminate once. When unlock switch pressed, all hazard warning lights illuminate twice. | ON or OFF | |
| Open Door Warning | ON | If door is not completely closed and electrical key transmitter sub-assembly lock switch is pressed, this function sounds a buzzer for 5 seconds. | ON or OFF | |
| Auto Lock Time | 30 s | This function controls amount of time from unlocking doors to automatic re-locking function. | 30 s, 60 s or 120 s |