POWER DOOR LOCK CONTROL SYSTEM OPERATION CHECK


  1. CHECK POWER DOOR LOCK OPERATION

    Note

    The operation check below is based on the noncustomized initial condition of the vehicle.


    1. Check the basic function.


      1. Check that all doors lock when the door lock control switch (for manual operation) is turned to lock and all doors unlock when turned to unlock.

      2. Check that all doors lock when the driver side door lock key cylinder is turned to lock using the key.

    2. Check the electrical key lock-in prevention function.

      Note

      In order to prevent the electrical key from being actually locked-in, the following inspection should be performed with the driver side door window open.


      1. Turn the ignition switch to ON or ACC.

      2. With the driver door open, check that all doors unlock immediately after the door lock knob for the driver door is pressed.

      3. With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.

      4. With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all doors unlock.

    3. Check the security function of the door lock control system.


      1. Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)

      2. Open the driver door and remove the key from the vehicle. With the door still open, lock the door using the lock knob. Close the driver door. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

      3. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

      4. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless door lock or entry lock operation. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

        Tech Tips

        Check that the security function of the door lock control system is canceled under the following conditions:


        • Engine running.

        • The driver door is unlocked using the key.

        • The driver side door is unlocked using the mechanical key (transmitter) or the electrical key*1.

        • The unlock side of the door control switch (for manual operation) is pressed after the door lock knob is unlocked manually.

        • The doors are unlocked by a wireless operation.


          • *1: w/ Entry and Start System

    4. Check the illumination function.


      1. Set the map light switch to the DOOR position.

      2. With all the doors locked, check that all doors unlock when the driver side door lock cylinder is turned to unlock using the key and that the map light turns on.

      3. Check that the map light turns off in approximately 15 seconds after the doors have not been opened.

  2. CHECK BACK DOOR UNLATCH OPERATION


    1. Unlock the door locks.

    2. Push the back door open switch on the back door outside handle.

    3. Check that the back door unlatches.

  3. CHECK DOUBLE LOCKING FUNCTION (w/ Double Locking System)

    Note


    • Never activate the double locking function when there are people in the vehicle because the doors cannot be opened from the inside. If the doors are locked by accident, unlock the door by using the wireless unlock operation or entry unlock operation*1.


      • *1: w/ Entry and Start System

    • The double locking function is not applicable to the back door.


    1. Check that the double locking function is set by using the wireless door lock operation.


      1. Open all the windows.

      2. Turn the ignition switch off.

      3. Open and close the driver door, and make sure that all doors including the back door are closed securely.

      4. Press the door control transmitter*1 or electrical key transmitter*2 lock switch twice within 5 seconds, and check that the hazard warning lights flash once at this time to indicate that the double locking function has been set.


        • *1: w/o Entry and Start System

        • *2: w/ Entry and Start System

      5. Try to unlock each door using the inside handle, and check that none of the doors unlock.

    2. Check that the double locking function is set by using the entry lock operation (w/ Entry and Start System).


      1. Open all the windows.

      2. Turn the ignition switch off.

      3. Open and close the driver door, and make sure that all doors including the back door are closed securely.

      4. Touch the lock sensor on the outside door handle twice while holding the key within 5 seconds, and check that the hazard warning lights flash once as an answer back.

      5. Try to unlock all doors with the inside handle of the vehicle, and check that none of the doors unlock.

    3. Check that the double locking function is canceled.


      1. Unlock the door by using the wireless unlock operation or entry unlock operation*1 while the double locking function is set, and check that the hazard warning lights flash twice as an answer back.


        • *1: w/ Entry and Start System

      2. Check that the doors can be opened by using both the inside and outside handles.

        Note

        If the battery of the transmitter is depleted, only the driver side door can be opened using the key.