NETWORK GATEWAY ECU(for GRMN) REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after cable is reconnected Click here.

  2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

    Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  4. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

    Click here

  5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

  6. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

    Click here

  7. REMOVE NETWORK GATEWAY ECU


    1. B0046EC

      Disconnect the 3 connectors.

    2. B0047PY

      Remove the 2 nuts and network gateway ECU from the junction block bracket.