POWER MANAGEMENT CONTROL ECU(w/o Stop And Start System) INSTALLATION

PROCEDURE

1. INSTALL POWER MANAGEMENT CONTROL ECU

   
   

   1. Engage the hook and install the power management control ECU.

   2. Install the nut.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   3. Connect the 2 connectors.

2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

   Click here

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

   Tech Tips

   Use the same procedure as for the LHD side Click here.