POWER MANAGEMENT CONTROL ECU INSTALLATION

PROCEDURE

1. INSTALL POWER MANAGEMENT CONTROL ECU

   
   

   1. Install the power management control ECU with the nut.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Connect the 2 connectors.

2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

   Click here

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

   Tech Tips

   Use the same procedure as for the LHD side Click here.